|
CT Sim Robotic
Laser Tracking Systems
GAMMEX A4000A AND A4100G
GAMMEX A4000A-PC-SYS 2 AND A4100G-PC-SYS 2 |
|
 |
|
The Gammex A4000A and A4100G CT Sim Robotic Laser Tracking Systems consist of two fixed side-wall lasers and one
overhead laser with a movable sagittal line. The sagittal laser provides precise position in one dimension (x axis) and relies
on the CT scanner couch motion for positioning in the second and third dimensions (Y and Z axes). All vital features of the
CT Sim Robotic Laser Tracking System can be controlled by a remote pendant, or by using the workstation in our PC-SYS 2
systems. Gammex lasers accept export coordinates from the treatment planning systems, allowing easy and accurate
movement for location marking. Your choice of Gammex Probe+ red diode or ProbeG green diode lasers can be used for
the fixed sidewall lasers and feature a wideview turret profile that allows mounting on angled walls. The ProbeG green laser
provides enhanced contrast on various skin tones, and its unique design incorporates power stabilizing circuitry that extends
diode life. The Probe+ (red) and ProbeG (green) lasers that are integrated into the A4000A and A4100G respectively
provide the precision optics and reliability you have come to expect from Gammex lasers. Both systems feature the quick
and easy hand adjustments for alignment that come with our Probe lasers and set us apart from the competition. Gammex is
proud to boast zero drift on all of our systems.Our newest software is able to read data files from any treatment planning
system currently on the market and read files that may already be integrated from other CT Sim system manufacturers.
Gammex was there in the beginning and we’re leading the way into the future. In an industry where precision is a must, let
Gammex light the way.
|
|
A4000A and A4100G systems include:
• One moving laser (choice of red or green diode)
• Two fixed side-wall lasers (choice of red or green diode)
• CT Sim software package
• Hand-held pendant
• CT Sim alignment phantom
• Software manual, calibration kit, controller box and all necessary cabling
|
|
A4000A-PC-SYS 2 and A4100G-PC-SYS 2 include:
• All items listed with the A4000A and A4100G plus Gammex approved desktop computer, 17 in flat panel LCD monitor.
|
|
SPECIFICATIONS |
|
Laser Beam Output
Power . . . . . . . . <1.0 mW (each beam) Laser Class II
Range . . . . . . . . 3 m
Line Width . . . . . <0.8 mm wide at 3.0 m
Line Length . . . . 1.0 m at 3.0 m
Drift . . . . . . . . . no measurable drift
Wavelength Red. . 6350 Å (635 nm) visible red
Wavelength Green . . . . . . . . 5320 Å (532 nm) visible green
Visibility . . . . . . visible even in strong ambient light
Laser Beam Adjustment
Length of travel . . 70 cm
Accuracy of travel ±0.5 mm at 3.0 m
Positioning accuracy . . . . . . ±0.5 mm at 3.0 m
Laser Dimensions
Laser Unit
(Moving). . . . . . . 112x21x9 cm (44x8.25x3.5 in) (HWD)
Probe+. . . . . . . . 17.3x14x8 cm (6.8x5.5x3 in) (HWD)
ProbeG . . . . . . . 27x14x8 cm (10.6x5.5x3 in) (HWD)
Power Module . . . 42x21x9 cm (16.6x8.25x3.2 in) (HWD)
Voltage requirements . . . 110/240 VAC
Certification
Complies with Center for Devices and Radiological Health regulations for Class II
lasers and all CE requirements.
(21 CFR 1040) (IEC 60825-1) (MDD 93/42/EEC).
Warranty
Lasers carry a one year warranty. Extended warranty available. Computer and
peripherals carry the original manufacturer's warranty only.
Minimum Requirements - Computer
Gammex CT Sim Systems have specific hardware and software requirements. For
ensured compatibility, Gammex recommends the purchase of the complete CT Sim
system. The CT Sim software has been validated using the computer and flat screen
monitor provided with the complete system. If the Gammex supplied computer and
monitor are not used, Gammex cannot guarantee software’s functionality and
performance. Compatibility with user supplied computers is not warranted. Call your
Gammex sales representative for more information.
| |
