|
The Gammex Probe+ lasers are designed with a 160 degree turret rotation. Often, existing architectural configurations limit
sites from installing traditional lasers, but with the Gammex Probe+ difficult room designs are no problem. Our unique and
proprietary thermal design of the Probe+ series ensure users of no visible “drift”. Vertical and horizontal adjustments allow for
angular and planar movement making the Probe+ system easy to install. The Probe+ laser alignment systems use a 635 nm
wave length laser light and built-in controls to vary the light intensity. Most of the diode products currently available for patient
alignment are in the 650 to 670 nm range. Because of the optical response of the human eye, the Probe+ line is perceived
as four times as bright as the 670 nm, and two times as bright as the 650 nm. The 635 nm yields essentially the same
brightness that you can obtain with our helium neon (HeNe) lasers. The Probe+ also allows a variable intensity control that
allows you to adjust the laser brightness based on the room lighting conditions. Another benefit Gammex lasers offer is a
protective shielding for the electronics and especially the diode. This enables our lasers to last longer and perform better
than other similar lasers on the market. The Probe+ series also have the same width base plate as the Exact-Align system
so it can be retrofitted to existing turret laser installations with no modifications. This makes conversion from the HeNe
systems to the Diode systems cost friendly and easy. The Probe+ diode laser has a 0.5 mm line at a distance of 2 meters.
Complete documentation on laser beam profile is included with each Probe+ diode alignment system. The standard Probe+
Diode laser utilizes an external power supply adaptable for international use. The Probe+ Diode laser system is easy to
repair and maintain.
| 
